Strategic featured “dowel bars” are fasteners that provide horizontal
and vertical load transfer between concrete blocks and prevent
relative motion and different deformations.

 

Thanks to dowel bars, it is ensured that a moving vehicle’s weight is shared with other concrete blocks, preventing different deformations between blocks.

Dowel bars are particularly used in the construction of runways, aircraft marshaling areas and high-strength concrete roads and areas.

Dowel bars are produced to diameters and lengths determined according to customer demands and in accordance with the terms of technical specifications and standards.

 

urun-ic-tekerlek

 

All phases of the production process are controlled through a quality control system, and control result reports are delivered to customers along with the product.

In order to prevent corrosion and abrasion, dowel bars are coated with epoxy paint.

Dowel bars can be used at the construction stage and also in areas that have already been built for the purpose of strengthening.

 

urun-ic-uygulama

 

 

Raw Material Properties

Production is made at ASTM A615/A615M, ASTM A675/A675M, ASTM A706/ A706M ASTM A1035 standards or in line with the demanded tension and breakage values.

 

 

 

 

 

Epoxy Coating

urun-ic-kroki

 

Epoxy-Coated Dowel Bar

Can be produced to various quality specifications in line with the demanded environment and in accordance with the ASTM A775/A775M standard.

 

 

Standard Diameters

urun-ic-cap

 

Standard Diameter Production

Products produced to 2, 16, 20, 25, 30, 40, 50, 60, 70 and 75mm diameters vary according to project needs. Production can also be made to special diameters determined again according to project needs.

 

 

 

Dowel Bar Specifications

RAW MATERIAL QUALITY YIELD STRENGTH MIN.(MPA) TENSILE STRENGTH MIN. (MPA)
S235 JR 235 340
S275 JR 275 410
S355 355 490
S355 JR J2 355 490
ASTM A 615 GRADE 40 280 420
ASTM A 615 GRADE 60 420 620
ASTM A 615 GRADE 75 520 690
ASTM A 615 GRADE 80 550 725
DIMENSIONS (MM) L E N G T H
D
I
A
M
E
T
E
R
250 300 350 400 450 500 550 600 650 700 750 900 1000
8
10
12
14
16
18
20
22
25
30
32
36

*Please ask for the alternative dimensions

 

Production Plant

We manufacture our products in our plant in Istanbul.

Our monthly production capacity is 350,000 pcs and we are able to increase our production capacity to 500,000 pcs in the event of order intensity.

Due to our production planning, product delivery starts between 15-30 days following the date of order.

 

 

 

Design and Application


Dowel and joint bars significantly increase the efficiency of street surfacing and prolong their life, provided that they are designed and applied correctly.

In the U.S.A and Europe, the use of dowel bars at airports and on roads—produced to ASTM Standards—appears in specifications as standard.

 

 

 

 

 

 

Packaging & Logistics

Before they are dispatched, in general dowel bars are packaged in special wooden crates prepared on EUR-pallets and covered with PVC lids in accordance with international articulated lorry, vessel and container shipment.

Project

Packaging can be made in any desired form, according to project features. In this way, time and cost calculations are targeted.